As I am searching on libraries that can be used with Lora and arduino I came across on this one: https://github.com/sandeepmistry/arduino-LoRa
Also the RFM9x has the following pinout:
The data transfer on this chip is achieved via an SPI Interface. Also as I see with the librarie's API specification is that I can setup the pins Slave Select (ss), reset and dio0 with the function:
LoRa.setPins(ss, reset, dio0);
So I should configure the pins reset and dio0 like that:
Parameter Name -> On RMF9x Chip pin
reset -> RESET
dio0 -> DIO0
But I cannot figure out how to connect the ss
pin mentioned in the method above, is the on-rmf9x chip the NSS pin?