2

First, if you just have 1 garage door opener, why are you generating a random client id every time? using a fixed clientID would be the right thing to do here. The only time a random clientID makes any sense is when you are using a transient client e.g. a webpage using MQTT over Websockets. Second, you appear to be double looping your reconnect function. ...


2

TL;DR: Innr Zigbee light works with Home Assistant. The long version: As with any other Zigbee light, there are two ways to connect it with Home Assistant: Pair the innr light with a Zigbee hub that is supported by HA. For example, innr works fine with the hue bridge which integrate well with HA. Connect an external Zigbee antenna with the raspberry pi, use ...


1

Probably the easy way to solve this would be proceed with a fresh reinstall. Reinstalling the Mosquitto broker with all its components and settings you need will restore previous configuration and address the problem. What is probably happened is Tuya Convert reinstalled and configure some of the Mosquitto MQTT Broker component changing its corresponding ...


1

Binary sensor AND: device_tracker: - platform: ping hosts: xi_readmi7a_name_ping: 192.168.1.43 ... Platform: ping allows you to create both a binary sensor (on/off) and a device_tracker (home/not_home). Accordingly, device_tracker can be added for stationary location of the user ...


Only top voted, non community-wiki answers of a minimum length are eligible